TAMRA phosphoramidite, 6-isomer
| Cat. # | Quantity | Price | Lead time | Buy this product |
|---|---|---|---|---|
| 2318-100mg | 100 mg | $110 | in stock | |
| 2318-250mg | 250 mg | $350 | in stock | |
| 2318-1g | 1 g |
$890
|
in stock | |
| 2318-5g | 5 g | please inquire | in stock |
This phosphoramidite is used for synthesis of oligonucleotides 5’-labeled with TAMRA.
TAMRA (carboxytetramethylrhodamine) is a xanthene dye from the rhodamine family with emission in the orange spectrum range (maximum at 563 nm). This fluorophore is traditionally used as a FRET-acceptor (and a quencher) in a pair with fluorescein (FAM) due to significant overlapping of their spectra. Thus, this phosphoramidite is convenient for the synthesis of dual-labeled probes TaqMan, which contain 5’-terminal TAMRA and FAM in the middle of the sequence or at the 3’-end (using Fluorescein dT Phosphoramidite and FAM CPG, respectively).
TAMRA 5’-labeled oligonucleotides are commonly used for quantitative PCR and fragment analysis (for example, for microsatellite marker analysis) because the equipment available has a detection channel for TAMRA frequently.
The TAMRA dye is not stable in the presence of ammonium and sterically non-hindered primary amines, so it is strongly recommended to follow specified conditions for labeled oligonucleotide deprotection.
Usage
Coupling: 7.5 min.
Deprotection: tret-buthylamine : methanol : water 1 : 1 : 3 (v/v/v) («TAMRA cocktail») for 6 hours at 60 °C, then cool down to room temperature.
Due to complete and irreversible degradation of the TAMRA dye, do NOT use aqueous ammonium and AMA for deprotecting a modified oligonucleotide from the solid-phase support.
Absorption and emission spectra of 6-TAMRA
Customers also purchased with this product
BDP® 630/650 lipid stain
Far-red fluorescent dye BDP 630/650 for staining of lipids and and other lipophilic compounds.DiA, lipophilic tracer
Wide spectrum fluorescent lipophilic dye for membrane labeling and cell tracing.Cyanine3 tetrazine
Tetrazine derivative of the fluorophore Cyanine3. Tetrazines react extremely quickly with strained alkenes (such as trans-cyclooctenes, cyclopropenes), and some strained alkynes.General properties
| Appearance: | red solid |
| Mass spec M+ increment: | 589.60 |
| Molecular weight: | 727.83 |
| Molecular formula: | C40H50N5O6P |
| Solubility: | good in acetonitrile, DCM |
| Quality control: | NMR 1H, HPLC-MS (95%), coupling test |
| Storage conditions: | Storage: 12 months after receival at -20°C in the dark. Transportation: at room temperature for up to 3 weeks. Avoid prolonged exposure to light. Desiccate. |
| MSDS: | Download |
| Product specifications |
Spectral properties
| Excitation/absorption maximum, nm: | 541 |
| ε, L⋅mol−1⋅cm−1: | 84000 |
| Emission maximum, nm: | 567 |
| CF260: | 0.32 |
| CF280: | 0.19 |
Your cart is empty
$ 
