TAMRA phosphoramidite, 5-isomer
Cat. # | Quantity | Price | Lead time | Buy this product |
---|---|---|---|---|
2497-100mg | 100 mg | please inquire | in stock (3 pcs) | |
2497-250mg | 250 mg | please inquire | in stock (2 pcs) | |
2497-1g | 1 g | please inquire | in stock (2 pcs) | |
2497-5g | 5 g | please inquire | in stock (2 pcs) |
This phosphoramidite is used for synthesis of oligonucleotides 5’-labeled with TAMRA.
TAMRA (carboxytetramethylrhodamine) is a xanthene dye from the rhodamine family with emission in the orange spectrum range (maximum at 563 nm). This fluorophore is traditionally used as a FRET-acceptor (and a quencher) in a pair with fluorescein (FAM) due to significant overlapping of their spectra. Thus, this phosphoramidite is convenient for the synthesis of dual-labeled probes TaqMan, which contain 5’-terminal TAMRA and FAM in the middle of the sequence or at the 3’-end (using Fluorescein dT Phosphoramidite and FAM CPG, respectively).
TAMRA 5’-labeled oligonucleotides are commonly used for quantitative PCR and fragment analysis (for example, for microsatellite marker analysis) because the equipment available has a detection channel for TAMRA frequently.
The TAMRA dye is not stable in the presence of ammonium and sterically non-hindered primary amines, so it is strongly recommended to follow specified conditions for labeled oligonucleotide deprotection.
Usage
Coupling: 7.5 min.
Deprotection: tret-buthylamine : methanol : water 1 : 1 : 3 (v/v/v) («TAMRA cocktail») for 6 hours at 60 °C, then cool down to room temperature.
Due to complete and irreversible degradation of the TAMRA dye, do NOT use aqueous ammonium and AMA for deprotecting a modified oligonucleotide from the solid-phase support.
Absorption and emission spectra of 5-TAMRA
Customers also purchased with this product
Cyanine5.5 NHS ester
Cyanine5.5 NHS is far-red / near-infrared amine-reactive dye.get free express delivery
FAM phosphoramidite, 6-isomer
Single isomer 6-FAM phosphoramidite for the synthesis of modified oligonucleotides.Cyanine3.5 azide
Cyanine3.5 azide for biomolecule labeling through click chemistry.General properties
Appearance: | purple solid |
Mass spec M+ increment: | 589.60 |
Molecular weight: | 727.83 |
Molecular formula: | C40H50N5O6P |
Solubility: | good in acetonitrile, dichloromethane |
Quality control: | NMR 1H, HPLC-MS (95%), coupling test |
Storage conditions: | Storage: 12 months after receival at -20°C in the dark. Transportation: at room temperature for up to 3 weeks. Avoid prolonged exposure to light. Desiccate. |
MSDS: | Download |
Product specifications |
Spectral properties
Excitation/absorption maximum, nm: | 541 |
ε, L⋅mol−1⋅cm−1: | 84000 |
Emission maximum, nm: | 567 |
CF260: | 0.32 |
CF280: | 0.19 |
Oligo synthesis details
Diluent: | acetonitrile |